-
Larger, beefier sibling of the K Series — heavy duty polypropylene float fully overmoulded around a high quality three core cable. Heavy duty S.P.D.T. microswitch rated 21 A at 250 V AC, able to directly control small pump motors. Sealed, tamper-proof, no metal parts in contact with the liquid and highly chemical-resistant. -
Diesel- and oil-resistant variant of the K Series — same compact 75 mm tilt-action float, but with orange polyurethane cable made for single point level control in oils. NOT suitable for water or sewage applications. -
Compact vertically-oriented probe-style float switch — 25 mm diameter outer body fits down a 25.4 mm pipe or borehole. Vented UPVC housing with internal polypropylene float. ±1 mm switching repeatability; ideal as an alternative to conductivity probes in submersible borehole pumps. -
Side-entry float-arm level switch for tank and chemical-tank level control. Polypropylene or 316 stainless construction with a polypropylene float, 1" BSP / NPT process connection. 5–500 V AC, 15 A S.P.D.T. micro-switch (L-H) or low-voltage gold-contact micro-switch (L-L), both with a built-in manual override. -
Industrial / mining-grade side-entry float level switch — same proven action as the L Series but in a billet-aluminium housing with a 316 stainless steel process connection. Polypropylene float and arm; 5–500 V AC, 15 A S.P.D.T. micro-switch (LM-H) with built-in manual override, or low-voltage gold-contact micro-switch (LM-L). -
Single-point level switch operating on Archimedes' principle — a non-floating polypropylene displacer suspended from a billet-aluminium head changes weight as it submerges, actuating a 20 A S.P.D.T. micro-switch (rated to 500 VAC) through a magnetic isolator. No metal parts in contact with liquid, full IP67 housing. -
Top entry two-position level regulator on a single suspended cord — two solid twist-lock displacers set the high and low switching points, from a 115 mm minimum to a 20 m maximum level differential. 20 A S.P.D.T. switch rated to 500 VAC (2 HP UL motor rating at 250 VAC) in a heavy-duty all-metal weatherproof housing. -
Four pressure switches in one. The E30 MK2 digital pressure switch can be configured to operate as a loss-of-prime switch, pressure guard for high/low protection, single-point snap-action switch, or dual-pump controller — 16 unique functions across 4 operating modes. -
A paddle flow switch with built-in digital timers that override the normally-off state of the switch and let a pump start in spite of an initial lack of flow. Includes an adjustable run-on timer that lets the pump ignore minor flow interruptions while still being fully protected against running dry. -
From a simple start-up timer to a full set of advanced flow- & time-based functions, the F29 MK3 is simply the most powerful and versatile flow switch available. -
The ultimate in versatile and flexible pump control — simple to use and very powerful. Monitors system pressure and flow to ensure complete pump protection, with five operating modes for single or dual pump systems. -
Designed for both fresh-water and effluent irrigation systems. Learns the operating pressure each time the system is started, then applies its own under- and over-pressure set points for highly targeted leak and over-pressure detection. Suits fixed pods or travelling irrigators.
