-
Versatile magnetically-actuated normally-off flow switch in a one-piece brass body. Switches on in response to flow. Ideal for clean-liquid applications including pressure boosting and the control of pumps or fans via a relay, contactor or PLC — in fresh water, sea water and diesel fuel. -
Larger sibling of the C15 — 1" BSPT/NPT brass body switch for medium-flow applications. Versatile, magnetically actuated, normally-off; switches on in response to flow. Ideal for clean-liquid applications including pressure boosting and the control of pumps or fans via a relay, contactor or PLC — in fresh water, sea water and diesel fuel. -
Compact inline flow sensor designed to detect very low flows — less than 500 mL per hour. Ideal for loss-of-flow detection in chemical metering and injection systems. PVC body with Viton seals; suits commonly used water-treatment reagents. -
Single-point level switch operating on Archimedes' principle — a non-floating polypropylene displacer suspended from a billet-aluminium head changes weight as it submerges, actuating a 20 A S.P.D.T. micro-switch (rated to 500 VAC) through a magnetic isolator. No metal parts in contact with liquid, full IP67 housing. -
Top entry two-position level regulator on a single suspended cord — two solid twist-lock displacers set the high and low switching points, from a 115 mm minimum to a 20 m maximum level differential. 20 A S.P.D.T. switch rated to 500 VAC (2 HP UL motor rating at 250 VAC) in a heavy-duty all-metal weatherproof housing. -
Four pressure switches in one. The E30 MK2 digital pressure switch can be configured to operate as a loss-of-prime switch, pressure guard for high/low protection, single-point snap-action switch, or dual-pump controller — 16 unique functions across 4 operating modes. -
Tough, highly-sensitive paddle switch for both hot and cold liquids. Magnetic repulsion drive (no seals, diaphragms or bellows) gives a high-pressure switch with no points of potential failure. Polypropylene or 316 stainless process connection; 3/4" or 1" BSP/NPT. -
A paddle flow switch with built-in digital timers that override the normally-off state of the switch and let a pump start in spite of an initial lack of flow. Includes an adjustable run-on timer that lets the pump ignore minor flow interruptions while still being fully protected against running dry. -
From a simple start-up timer to a full set of advanced flow- & time-based functions, the F29 MK3 is simply the most powerful and versatile flow switch available. -
The ultimate in versatile and flexible pump control — simple to use and very powerful. Monitors system pressure and flow to ensure complete pump protection, with five operating modes for single or dual pump systems. -
Built tough for the most arduous industrial and mining applications. Rugged but highly-sensitive paddle switch with a billet-aluminium housing and a one-piece 316 stainless steel process connection. 400 bar pressure rating, manual override built into all models. -
Designed for both fresh-water and effluent irrigation systems. Learns the operating pressure each time the system is started, then applies its own under- and over-pressure set points for highly targeted leak and over-pressure detection. Suits fixed pods or travelling irrigators.
